View Full Version : SPD Support
- flashing error
- Unable to boot after CCMOS, will SPD-Z help?
- SPD-Z WILL NOT START
- SPDZ awesome!
- SPD-Z error
- Unable to Boot after flash
- Backup is working restore not ????
- Thanks OCZ!
- Where do we get SPD profiles?
- One didn't flash
- Do i need to flash?
- reaper 8500
- SPD-Z for *nix?
- Unable to boot after CCMOS, the follow-up att: Marcus
- SPD-Z not allowing more than 1 flash ...
- with striker extreme
- SPD update OCZ OCZ5001024ELGEGXT
- 64-bit Vista w/OCZ2M8004GK 800Mhz memory
- Performance Timings for Vista x64
- SPD for OCZRPR800C42G
- SPDz - How it works
- weired spd-z
- OCZ OCZ2N1066SR2GK spd-z profile
- Changing OCZ2VU8004GK with SPD-Z
- OCZ DIMM 2 GB DDR2-800 (OCZ2T800C42G, XTC Titanium) crashed after SPD-Z Flash
- Problem with OCZ2PRP10662GK
- question about spd-z
- OCZ2G8002G Qeustions
- PC2-8500 Platinum SLI-Ready Edition New ?
- SPD update for OCZ2P800R22GK
- Reaper 8500 SPD-Z problems
- increase CAS timing
- pc8500 custom timings and speeds
- Change timings in SPD, instead motherboard...
- Performance PC2-6400 SPD Update
- Changing OCZ2VU8002G default to DDR2 800
- SPD for PC 6400 Sli-ready memory 2x1Gb kit.
- SPD for SLI ready DIM 0 not reading as it should
- OCZ 4GB ReaperX PC2-8000 tRFC spd problems
- problem help me for image spz OCZ2RPR10661G
- Cant go over 960mhz with the 46 TRFC
- EPP enabled=errors when tested w/Memtest 86
- DDR2 2X2GB 800MHz Dual Channel will only boot with 3GB
- Memory Spd Not reading right
- OCZ2N1066SR2GK SPP Issue
- Dell XPS 720 with OCZ2N1066SR2GK - Slot 1 & 2 have different Timings Table?
- Need spd flash for 2x2GB kit 8000U
- OCZ2N1066SR1G SPD issues
- ocz 800mhz running only at 533 and 667
- SPD Update for OCZ2P8004GK
- Request SPD-flash (Asus X38 TRFC issue)
- 4GB OCZ reaper problems on x38 chipset
- OCZ2P10004GK spd flash
- Getting 404 Error
- Flashing OCZ4002048ELDCPE-K with spd from OCZ5002048EBPE-K
- Need to flash OCZ2G8001GK kit to make it compatible with Abit F-I90HD
- Need SPD-Z for Reaper HPC PC2 8500 4Gb kit.
- misprogrammed kit
- Memory failing memtest
- thinking of flashing an SPD....read this first.
- Help: need to reflash OCZ2P10004GK
- Reflashing for tRFC
- need a spd file please
- Tony / Ryder Request SPD File for 2GB FLEX PC9200
- HELP: OCZ Platinum 4GB isn't working
- OCZ2N10661G Spd problem
- Flashed My Reaper HTC 8500 2gig Sticks
- Asus striker II formula and OCZ2N1066R2GK freeze problem
- PC8000 reading as PC6400
- OCZ2M8004GK need SPD for 333Mhz operation
- Need SPD file for: OCZ2RPR10664GK
- ATTN - 4/8GB CONFIG INFO and SPD FLASHING
- OCZ2N1066SR2GK SPD Problem
- spd OCZ2P10004G
- ASUS P5E3 Deluxe and 2x2GB OCZ DDR3 Modules
- OCZ 4GB SLI-Ready Memory and 750 SLI
- Question about EPP
- OCZ400512R2 SPD discrepancy
- Missing entry in SPD OCZ DDR2 8800 Gold XTC
- 8GB (OCZ2P8008GQ) Asus P5B SPD Flashed
- ocz pc8000 platinum 8g on asus maximus
- need SPD for OCZ2RPX10002G
- SPD for DDR400 OCZ4002048ELDCPE-K R on GA-8KNXP (Rev 2.x)
- SPD Table Invalid?
- 4gb 2x2 8000 ReaperX, Asus Striker Extreme question.
- Blast from the past = disaster
- SPD OCZ Flex II and SPD
- OCZ3P180001G SPD file and helps needed!!!!!!!!!
- In need of compatibility for msi p35 platinum
- Reaper 8500 4GB >> Cannot set correct timings <<
- OCZ3G10661G SPD MISCONFIGURATION
- OCZ2RPR11502GK old SPD?
- SPD Flash tool help
- OCZ FLEX 9200 and POST problems because of too low default vDDR
- Better Timings for EVGA 680i after new SPD applied..
- OCZ2RPR1150GK with old profile, SPD Tool required?
- OCZ2RPR10662GK in P5K = no post
- SPD timings help
- X48 Rampage Formula + 4gb ReaperX 8000 modules SPD flash request
- OCZ 2GB Kit Wrong RAM??
- SPD and actual ram timing
- OCZ2P8001G SPD
- SPD profiles for Striker II formula
- need help with spd 23-25
- ocz1066 run 333mhz
- Correct timings for OCZ3RPR13334GK
- spd error 23-25 on boot
- Byte 23 and Byte 25 issues with AMD motherboards
- SPD request
- Original SPD for OCZ Platinum PC2-8500 4GB kit?
- need help to set ram timing with GA-M57SLI-S4(rev. 2.0) MB
- ocz3g16004gk request for spd
- I need default SPD File for OCZ2N800SR4GK.
- OCZ XTC Platinum Rev.2
- OCZ2G8002GK won't work on 1.8V
- 1066 Speed problem on M3A32-MVP with 8 GB RAM
- SPD settings for 1 stick of OCZ3p1600eb4gk
- OCZ EBPE DDR500 2x1024 DUAL
- Confused over "correct" SPD for OCZ2P8008GQ
- SPD Flashing for 780a Chipset?
- OCZ2P800R22K and Gigabyte GA-M57SLI-S4 spd issues
- OCZ3P20002GK and ASUS S2E issue
- RAM issue
- OCZ3RPR16002GK - SPD wrong readings
- 2GB Module PN - OCZ2M8002G
- OCZ REAPER 9200 AND MAXIMUS FORMULA (X38) HELP!!!
- OCZ PC-3200 Platinum XTC and Gigabyte
- Incorrect SPD
- OCZ PC2-8000 ReaperX HPC 4GB Edition on Asus Maximus Formula X38 DDR2
- CPU-z and SPD values conflict
- ram speed not sure
- OCZ2p10662g and 1066
- Asus Formula II + OCZ reaper SPD problem
- OCZ 1600 DDR3 3x1 CL7
- SPD FILES THE PROBLEM WITH MY RAM?
- Mismatched SPD with 2x2 OCZ1800 plats, does it matter ?
- OCZ2RPR10664GK timing help.
- Subtimings OCZ Reaper
- Original SPD for OCZ4002048ELDCPE-K
- OCZ PC-8500 SLi Ready Timings
- spd flash of OCZ3P13332GK DDR3 Memory
- Bad memory flash
- new spd file needed??????
- 1600LV6GK with no xmp profile, need spd dump
- OCZ Blade kits PCB
- OCZ3FXE20004GK How to Run at 2000Mhz on 790FX-GD70?
- Mix of DDR3 Gold+Platinum=BSOD
- Support Question Missing EPP Settings?
- Discussion Does the SPD on a memory module affect how fast is goes?
- The problem of OCZ3G1600LV6GK?
- OCZ3X1600LV6GK XMP different between two sets.
- Need SPD for OCZ2P10664GK
- Chips on OCZ3B2000C9LV6GK
- OCZ 2x1GB ddr2 fatal1ty Edition X ASUS P5K-SE/EPU
- Are these timings correct? OCZ2RPR10664G
- Support Question OCZ2RPR11504GK SPD File?
- 800->667 MHz Clock down issue with OCZ2M8004GK
- OCZ3P1600LV SPD CPU-Z READING
- XMP not stable, any OC not stable
- Setting Question OCZ2P1066LV4GK - need complete set of timings
- Setting Question 2 x OCZ3N1800SR4GK
- Support Question 2xOCZ3RPR13334GK
- Support Question Problems booting with cheap motherboard
- Support Question ocz2p10662g 2gbx2 on DFI BI P45 T2RS
- Support Question OCZ DDR3 PC3-12800 (2x 1GB) on GA-EX58UD3R (1.0, F6)
- Support Question Messed up default SPD..
- Support Question IS PC-3700 OK IN LIEU OF PC-3200?
- Setting Question OCZ DDR3 PC3-12800 Gold Triple Channel
- Setting Question OCZ2B1066LV4GK Will do 800mhz?
- Support Question Can OCZ PC3-10666 DDR3 SODIMM [OCZ3M13334GK] work with 1066Mhz?
- Support Question OCZ3G16002G showing different max bandwidths in CPU-Z
- Support Question SPD problems
- Support Question OCZ2FX11502GK & Rampage Formula
- Support Question Asus P6T Deluxe V2 & OCZ Intel Core i7 XMP Edition 1600 MHz 6GB DDR3
- Support Question ASUS P5B Deluxe and 4GB (2x2048) D/C Kit PN - OCZ2P10664GK
- Support Question Memory upgrade problem
- Support Question Platinum 1600 SPD says 1066????
- Support Question OCZ XTC Platinum OCZ3P1333LV1G
- Support Question SPD file for OCZ Platinum 1066 DDR2
- Setting Question OCZ3P1333LV4GK SPD and Voltage
- Support Question OCZ2RPR800C42G revisions SPD 1.0 and 1.2
- Support Question Updated SPD required for VX2?
- Support Question LATENCY ISSUE! SODIMM PC 8500-1066MHz
- Support Question Flashing SPD
- Support Question OCZ2P8001G SPD
- Support Question OCZ2G8004GK :
- Resolved OCZ2RPX10002G
- Support Question OCZ3P18002GK - fake or not?
- Support Question OCZ2VU8002GK
- Support Question Is there a differance in these 2 sticks of memory???????
- Support Question OCZ3P13334GK PC3-10666 - incorrect SPD?
- Support Question Errores en memoria RAM
- Setting Question OCZ2M8002G
- Support Question OCZ4001024VSO in older toshiba P25
- Support Question probleme configuration ASUS whit OCZ DDR3 2 x 1 Go PC12800 Intel XMP Titanium Edition
- Support Question Registered DDR 3200 OCZ4001024ELERDC-K
- Support Question Ocz Blade 15000 cl7
- Support Question The SPD settings in my memory are not concordant with my memory's specifications
- Support Question OCZ3P13334GK on GA P55A-UD4 SPD????
- Discussion SLI ready PC2 6400 on ASROCK A785GMH/128M
- Support Question SPD on OCZ2RPR10662GK seems to have been altered. Need verification.
- Support Question Different Max Bandwith when 2 similar PC10600 RAM inserted
- Support Question OCZ DDR3 PC3-15000 Reaper CL9 - 4Gb of 6Gb at BIOS post.
- Support Question about OCZ3BE1600C8LV4GK
- Support Question ocz in brazil
- Support Question wrong spd of ocz3g1334gk
Powered by vBulletin™ Version 4.0.5 Copyright © 2010 vBulletin Solutions, Inc. All rights reserved.