SPD OCZ Flex II and SPD

[anjx]

Hi, i have a problem with my system:
It have a frequently restart, and i think that this problem issue from ram.

I have DFI ut t2r x48
E8500
OCZ Flex II pc2-9200 2x2gb

How to flash the spd of my ram, and what is SPD of my ram?

Thanks:bow:

[RyderOCZ]

Hello,

What settings are you running? What voltage, etc?

Changing the SPD will not simply make things better.

[anjx]

I try many settings and voltage...
I have a stop of system even in the bios:beat:

[RyderOCZ]

What FSB are you running?

Tell me what you have tried. It is Sunday here, I will not be here all day to help troubleshoot this with you.

Post the FSB, memory divider, Memory strap, etc that you have been using. Also the timings and voltages. I will try to get you some suggestions. You may not be able to get 1150 stable right off the bat, it is going to take some tweaking.

Set the Voltage to 2.0V for the ram. Set the FSB to 333 and set the 333/1066 ram divider. Timings at 5-5-5-15 (CAS-Trcd-Trp-Tras) with the Trfc at 60. See if that is stable for now, then we can tweak up to 1150. Ok :)

Thanks

[anjx]

Thank rider and sorry for trouble.

FSB: 333;
Multiplier: 9.5;
Voltage cpu: Auto-1.22v;
timings: auto;
divider: 400/800

But I try another settings:

FSB: 350; 400; 430;
Multiplier: 8; 9; 9.5
Voltage cpu: 1.35v; 1.40v
timings: 5 5 5 15 or 18
divider: 333/1066

Now the problem don't see, but to next reboot I'll try your settings:smash:


PS I'm not greenhorn of overclock, but this motherboard is....:beat:

[anjx]

I discover the problem. So, if set divider manual, the system is unstable, if I set on auto, the system is stable:look:

[Tony]

http://www.csd.dficlub.org/forum/showpost.php?p=48844&postcount=8


have a look at that