6GB-OCZ3G16006GK Errors

[Kizzie]

I'm trying to pass Prime95 and Linx and continue to fail. I have the RAM set at 8-8-8-24, CR 2T, and tRFC 88. I tried dropping down to tRFC 80 and got slightly better results but still received errors. Any settings that need an adjustment possibly? Or is it more likely that one of the sticks is bad? I am in the process of testing them individually with Memtest86+. Is there a faster way to test the sticks individually? LinX would not run with just one 2GB stick.

6GB (3x2048MB) OCZ3G16006GK
8-8-8-24
DIMM 1.650v
QPI 1.350v

Prime95 tRFC 88

http://farm3.static.flickr.com/2564/3961246859_96ef4939bb_b.jpg

LinX tRFC 88

http://farm3.static.flickr.com/2654/3961246805_110b8a461c_b.jpg

Prime95 tRFC 80

http://farm4.static.flickr.com/3477/3962021988_51c78d083d_b.jpg

LinX tRFC 80

http://farm3.static.flickr.com/2526/3962022030_9145ee0cc0_b.jpg

[SteveOCZ]

Hey,

Do the sticks error at 1333Mhz as well?

[Kizzie]

At 1333Mhz setting Prime95 fails within five minutes and LinX is failing within ten passes.

[SteveOCZ]

In that case I'd continue testing them one stick at a time. It's likely you have one faulty stick there