-
OCZ User
im having trouble with my OCZ Platinum
adv address line test failed? I used Pc Check from the uk and noticed this error came up with the advanced memory extended diagnostic testing. With my vista my unreal toruanament 2004 closed unexpectedly more so on certain servers but even in xp I got some type of bluescreen that I dont remember the message. Im pretty sure its a memory issue because I have tested everything else and it works fine. I also used memtest86 but the difference from that was it wasnt testing as fully as pc check and therefore didnt come across any errors.
I found a review of my motherboard that im having the memory timing trouble with and here it is: http://hardwarelogic.com/news/132/AR...007-08-17.html
Here is the memory I have: http://www.newegg.com/Product/Produc...82E16820227139 Please can anyone assist me in fixing this issue in my gaming pc?
-
Hello and welcome to our forum support!
Make sure your ram voltage is 2,1v to run platinum sticks, on you bios press alt+F1 and set DDR2 overvoltage control to +0.2-0.3v, also check timings for 4.4.4.15 and Command Rate 2t, leave the rest on auto.
Please run memtest86+ ver 1.7 to check you ram after this changes.
Here you have some guide with same mobo and ram:
http://www.ocztechnologyforum.com/fo...ad.php?t=24948
Please give us a feedback, regards!
-Si necesita ayuda no dude en enviarme un PM o E-mail-
-
OCZ User
thankyou
hdmuzzilloOCZ im sorry I didnt respond earlier; I was away for 20 days. This is amazing and I will print this out and fix this issue, Thankyou. :thumbs:
-
Glad to help, just ask if you need more assitance.
Regards!
-Si necesita ayuda no dude en enviarme un PM o E-mail-
-
OCZ User
fixed
hdmuzzilloOCZ I used the fourth image of that tutorial and what you told me and I was able to get it setup properly so my ut2004 never closes by accident anymore 
and I made a small tutorial on two websites I administrate.
-
Great news wich im glad to check
-Si necesita ayuda no dude en enviarme un PM o E-mail-
-
OCZ User
F10
Did I mention I have f10 bios? is it any different with that?
-
No neew to make any changes if working stable, f10 its ok.
Best regards!
-Si necesita ayuda no dude en enviarme un PM o E-mail-
-
OCZ User
now I have a quad core cpu in my gaming pc Q6600 and im going to install Vista 64bit, How do I set this up in F10 bios now?
Last edited by vectoravtech; 09-17-2008 at 05:55 AM.
-
The settings are the same....
A great place to start before posting a thread: The OCZ FAQ
Make sure to check out our Information Section that answers many more questions you may have about your system and your OCZ Product.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules
Bookmarks