OCZ3P1600LV6GK Timing

[galalleni]

• OCZ part number:-OCZ3P1600LV(2G/6GK)
• Module size and kit size:-3x2gb, tri-channel
• CPU model and rated speed:-i7-965,133BCLK,6.4GHz QPI
• Overclocked CPU speed:-133x25=3325MHz=3.20GHz
• Divider and FSB used:-DRAM:133x12=1600MHz-800MH
• Motherboard and revision:-Gigabyte EX58-UD5 rev.12
• Motherboard Bios rev:-F5
• Video card:-EVGA Geforce GTX 285
• Power supply:-KingWin, Mach 1, 1220W
• Operating System:-XP Pro 64-bit
• CPU and System Cooling:-Antec 1200 Case
• CPU and System temps:-CPU:30I,36L SYS:32I,40L
• Purchased at/on:-NewEgg (3/8/2009)
• Country:-USA
• Memory voltage:-1.64-1.66

Howdy OCZ,

Please excuse me if this has been asked already- I couldn't find it searching the forum. I need all the timings for ocz3p1600lv2g sticks - already have mem set to 7-7-7-24 @ 1.65V - but there are a ton of options here, please advise. Thank You!

[SimonOCZ]

Hi, Use Memset and click the SPD button to get full timings table for each default speed.

Link : http://www.tweakers.fr/download/MemSet40.zip

Regards,
Simon

[galalleni]

Howdy -

Note: memset 4.0 only shows Jedec SPD to 600MHz (Jedec#3) - not an XMP SPD profile - No SPD timings for 800MHz (unless an XMP module is used). See attached image

[SimonOCZ]

Try using 7-7-7-24
tRC 30,
tRFC 60
tRRD 5
tWR 8
tWTR 5
tRTP 5

Others set to AUTO.

If you encounter any problems with these please reply!

Simon

[galalleni]

Howdy,

Those settings work like a peach! Thanks!!